FUNCTION
-With
hydraulic and pneumatic operated system, the machine is used for the lasting
operation of the upper`s side and heel part in one operation.
-With three
kinds of intelligent operation mode: fully automatic mode, semi automatic mode
and manual mode.
-The PLC
system is equipped with the touch screen to operate the machine with the
graphical symbols, real time running state and the process of action modify in
animation display, easy to operate.
-The setting
of the parameters(time and stroke) is by numerical key in, with the protection
of the key switch to avoid the reading or change by the non-authorized.
-The side
lasting device is equipped with four fingers lasting structure, with the
designed function for the overlapped lasting area with heel lasting device.
Reducing the defect of lasting.
-Two pincers
are provided to achieve a special counter pull in side and heel area.
-The finger
lasting mechanism is designed with the automatic balance function, with side
radian automatic bonding, waist fit tightly solid, and the two step operation
pressure setting.
-Equipped with
the two floating polyester rod, directly use hot-melt adhesives for upper
bonding , avoid manual brushing glue to work.
-The stop
point of nozzles for the cement path can be set directly by touch screen, it is
easy to adjust cementing path.
-The control
of the opening stroke for the left and right nozzles, can be chosen with the
upper shape following node or the constant pressure opening mode.
-Used for more
than 180mm of last in length, the longest gluing distance is 230mm.
-variety of
gluing operation modes can be selected in side lasting and heel lasting
position,
glue speed can be stepless speed regulation.
-The vertex
adopts telescopic structure design, with height fine-tuning device for lasting,
positioning accuracy.
-Press fitting
adopts chain coating, tighten excellent results.