I am not afraid to learn maths, and I am not afraid to travel all over the world, so I boldly choose to become a brave man with both liberal arts and science. Unfortunately, as a science student, I have not had the courage to connect to an electric light. Use his only mathematical knowledge to discuss some problems with the automatic gluing of the front helper.

Many friends bought the automatic gluing function when they bought the front helper. In actual use, 70% of them did not perform well. No matter which automatic gluing front helper you use, please pay attention to the following points:



1. The toe of the shoe, especially the point of the toe of the pointed shoe, must be glued, and the amount of glue should not be large, so as to avoid the accumulation of glue and it will be difficult to remove it later. Most pointed shoes cannot be glued automatically, because the tip position cannot be glued, and it is a false virtual binding. Therefore, you must grasp this point when designing the plastic plate. The glue pen gluing is even more like Compared with, glue should be applied to the tip, but not too much;



2. The end is perfect. The front upper machine for rubber disc gluing often has a few more glue holes in the waist position of children's shoes and high-heeled women's shoes (that is, the end end of the front gluing). Because their waist positions are relatively short, they must be adjusted to Stop at the point where it should end, and no excess glue will appear. If it is matched with the middle and rear end of the automatic gluing, the end point should be perfect, because the remaining glue will directly affect the lasting effect of the middle and rear ends;



3. Accurate gluing of the inner waist! If it is a fixed rubber plate gluing, it is recommended to produce the left and right feet to ensure that the inner waist is beautiful. If there is only one front helper, be sure to use the two-stage plastic plate structure with the left and right feet that can be automatically switched. Of course, the glue pen application has solved these difficulties.



If you pay attention to solve the above three points, you have half the success of automatic gluing. The principle of gluing the glue plate is that a certain amount of glue flows out from a glue outlet hole to form a spaced point. As the sweeper indenter of the front helper pushes and squeezes, these glue balls are connected into lines and become The whole corners of the help are covered with hot melt glue and expand inward and outward to form a narrow glue surface, ensuring that the corners of the help are filled with hot melt glue.

Here, when combining dots and lines, pay attention to the distance between the dots, that is, the gap between the glue holes and the size of the glue hole, to ensure seamless fusion between the dots, and the amount of glue should not be too large to overlap the glue. . Of course, the gluing of the glue pen track can more accurately grasp the essence of this point. First of all, the thickness of the glue pen is adjustable, which can avoid the problem of insufficient glue and too much glue.



Secondly, under the guidance of Murray, when the glue pen is close to the waist position, the glue pen has collected the glue so that the glue will not flow out, and the remaining glue remaining in the glue nozzle will still be smeared to the waist position to ensure that there is an appropriate amount of hot melt glue at the waist position .

For the entire automatic gluing front helper, you only need to grasp the three points, connect the dots to form a line, and the line and surface are combined, you can invincible, and the automatic gluing into a joke becomes a very easy task!



Dapeng sticks to its inner beliefs, constantly pursues excellence, always keeps in mind the corporate mission of "down-to-earth, set a good example for the industry, and guide the healthy development of the shoe industry", continuously strengthen internal training, and serve you wholeheartedly with a grateful heart! Choose the Dapeng machine, and it will be even more powerful! Choosing Dapeng means choosing an equipment supplier that is pragmatic, responsible and honest!



Official website: http://www.rocmachine.com

Order consultation hotline: 13924236998 (same number on WeChat)



Our main products: shoe factory assembly line, three-dimensional assembly line, computer automatic heel nailing machine, heel setting machine, shoe factory equipment, intelligent gluing front machine, computer back nailing machine, leather peeling machine, large skin Machine production, Italian shoe machine, Deslon shoe machine