Clamshell automatic air bag bottoming machine, when we first developed it in 2000, many people did not understand it. Later, a Spanish trader required all its processing plants to use the machine, and this machine made the machine fire until now .
It turns out that the machine is pressurized by air pressure when it is pressed, which has a good protection for EVA foam, decorative materials such as vamps and other materials. At the same time, it has a secondary pressure. The pressure duration is highly consistent with the crystallization time of the glue. Make sure to press firmly and never degumming.
D-585C Pneumatic bottom pressing machine
At present, many light curtains on the market that have discarded the automatic induction on both sides are replaced by manual ones. The more simplified ones use a single layer of rubber with only one pressure. This is really dangerous: it cannot penetrate some thick or hard outsole forces ,There are security risks. The cost is saved a lot, and children's shoes or soft bottoms can also be dealt with.
Scanning technology like this applied to the bottom pressing machine can be said to be well-intentioned. Through the test, it can be clearly seen that the various parts of the shoe sole are evenly loaded, which is really like a scanned piece. It is very reliable and no longer worry about the insecurity brought by the small air pressure machine of the earthen cannon.
Product Features
360 degree non-dead angle pressing process
1. D-585C is widely used in men's and women's sports shoes, casual shoes, and other shoes with square or smooth rubber outsole. This machine is a pneumatic machine, using PLC program control;
2. This machine is equipped with the function of adjusting the height of the shoes; the operation mode fully complies with the safety standards, just press the "STOP" button, the safety program in the machine will open the door to avoid any accident;
3. The operation mode of this machine: put the shoes upside down in the preset position with the outsole, you can adjust the "automatic" and "manual" functions in advance;
4. Automatic function: put the shoes in the correct position, when the hand leaves the work area, the upper cover will automatically close, and the air will enter, and the machine will automatically operate according to the preset time.
5. Manual function: put the shoes in the correct position, when the hand leaves the work area, press the operation keys with both hands, and the subsequent operation procedures are the same as the automatic functions.
Process comparison before and after soles ↓↓↓
Model
|
D-585C
|
|
Capacity
|
600 Pairs/8h
|
|
Power
|
0.2 KW
|
|
N.W.
|
290 Kg
|
|
Hydraulic pressure
|
0.6 MPa
|
|
Dinmension
|
L800*W500*H1660 mm
|
Dapeng adheres to its inner conviction and constantly strives for excellence. It always keeps in mind the corporate mission of "down to earth, setting a good example for the industry, and guiding the healthy development of the shoe industry", constantly strengthening internal cultivation, and serving you with a grateful heart! Choosing Dapeng machines is even more powerful! Choosing Dapeng is to choose a practical, responsible and honest equipment supplier!
Official website: http://www.rocmachine.com
Order hotline: 13924236998 (WeChat same number)
Our main products: shoe factory assembly line, three-dimensional assembly line, nail heel machine, heel shaping machine, shoemaking factory equipment, front helper, rear helper, peeling machine, Italian shoe machine, Texel shoe machine